Computer Heat Transfer Thermal Pad Die Cutting China supplier
silicone thermal insulation sheet
The TIS™100-01 Series products are the high-efficiency insulation ones with thermal
conduction properties. The supplement of the insulation base film
made by silica gel into the heat-conduction material creates a
great effect on both the insulation and heat conduction.
> Highly compliant surface characteristic with high thermal
> High thermal conductive and High dielectric strength
> Low thermal resistance with high voltage isolation
> Resistant to tears and punctures
> Power conversion equipment
> Power semiconductors:To packages, MOSFETs & IGBTs
> Audio and Video components
> Automotive control units
> Motor controllers
> General high pressure interface
Typical Properties of TIS™100-01 Series
|Ceramic filled silicone rubber||***|
|Specific Gravity||1.75||ASTM D297|
|Heat Capacity||1.0||ASTM C351|
|Tensile Strength||425||ASTM D412|
|Continuos Use Temp||(-58 to 356℉) / (-50 to 180℃)||***|
|Electrical|| || |
|Dielectric Breakdown Voltage||>3500||ASTM D149|
|Dielectric Constant||5.5||ASTM D150|
|Volume Resistivity||3.5X10"||ASTM D257|
|Fire rating||94 V0||Equivalent UL|
|Thermal|| || |
|Thermal conductivity||1.0||ASTM D5470|
|Thermal Impedance @50psi||1.52||2.35||3.45||ASTM D5470|
0.005"(0.127mm) 0.006"(0.152mm) 0.008"(0.203mm) 0.009"(0.228mm)
0.010"(0.254mm) 0.012"(0.304mm) 0.018"(0.457mm)
Consult the factory alternate thickness.
16" x 18"(406mm x 457mm) 16" x 200'(406mm x 60.9M)
Individual die cut shapes can be supplied.
Peressure Sensitive Adhesive:
Request adhesive on one side with "A1" suffix.
Request adhesive on doule side with "A2" suffix.
TIS™ series sheets are fiberglass reinforced.